Tip 1 of 2

During initial setup or after a power loss, you may need to set the time. If the time is not set, CL will be flashing in the base display window.
To set the day and time for the base unit, complete the following steps:

Step 1: Press TIME/SET. The system will announce the current setting.

Step 2: Press TIME/SET again. The system will announce the current day setting.

Step 3: Press CHANGE on the base until you hear the correct day.

Step 4: Press TIME/SET. The system will announce the current hour setting.

Step 5: Press CHANGE on the base until you hear the correct hour.

Step 6: Press TIME/SET. The system will announce the current minute setting.

Step 7: Press CHANGE on the base until you hear the correct minute.
NOTE: Pressing and holding the CHANGE button when setting the time will increase the minutes by 10.

Step 8: Press TIME/SET to confirm. The system will announce the new day and time setting followed by a confirmation beep.

 

Tip 2 of 2

The date and time on your handset will be automatically set by incoming caller ID. However, you can manually set the date and time by following these steps:

Step 1: Press PROG/CHAN. DIRECTORY is displayed.

Step 2: Press ‹ or › until the screen displays DATE/TIME.

Step 3: Press SEL. The month flashes.

Step 4: Press ‹ or › to select the correct month; press SEL.

Step 5: The date flashes. Press ‹ or › to select the correct date; then press SEL.

Step 6: The hour flashes. Press ‹ or › to select the correct hour; then press SEL.

Step 7: The minute flashes. Press ‹ or › to select the correct minute; then press SEL.

Step 8: AM or PM flashes. Press ‹ or › to select AM or PM.

Step 9: Press SEL to complete date and time programming. You will hear a confirmation beep.